Soap Making

Soap Making Technique

The soap making equipment

For safely making homemade soap it is essential that the specific proportions of these soap ingredients are scrupulously followed.

It is highly recommended that you use a specialised software to calculate the proportions for each ingredient and to run it every time a new recipe is tried. There are many types of softwares for this purpose. There are even iPhones apps.

Some basic equipment must be used when preparing soap ingredients and making soap:

– an accurate scale;

– an accurate quick reading thermometer;

– a few small measuring cups;a stick blender to blend the oils with the lye mixture and start the saponification process;

– and soap molds.

Here is an example of the proportions for the various soap ingredients:

– 450 grams of vegetable fat;

– 170 millilitres of water

– 60 grams of caustic soda

Soap Making for Beginners: 3 Easy Soap Recipes • Lovely Greens

The soap making process

Preparation of soap ingredients

Soap making requires water, caustic alkali and fats or oils.

It is very important that caustic soda is gently poured into water, and NEVER the opposite which will cause a kind of explosion and splash corrosive product on your body. The temperature of the water and soda mixture naturally rises up to around 190°F, or 90°C.

Therefore a glass (Pyrex) or a stainless steel container is to be used. Do not use a plastic container as it would melt due to high temperature. Please remember that aluminium is corroded by soda. Always use wooden spoons to stir soda.

Mixing the soap ingredients

Soda temperature must lower down to 95-105°F (35-40°C) and oil must be heated up to 130°F (55°C). After checking those temperatures with an accurate quick reading thermometer, slowly pour caustic soda into the heated oil. As soon as the two ingredients are mixed, you can use a stick blender to blend the oil with the lye mixture. While stirring the lye-water-oil mixture with the stick blender, you turn on the blender in short bursts. Blend for 3 to 5 seconds and then stir some more.

Once you start using the stick blender, you may see the oil turn cloudy and the soap mixture begin to come together. Keep blending in short bursts until the oil and lye-water are completely mixed together. This should not take more than 30-40 seconds.

Global Organic Soap Market Size, Share, Trends | Industry Report 2028

Now you are nearing the stage called “trace”. Using the stick blender enables you to reach trace in under a minute whereas if you use a wooden or a plastic spoon it will take 10 to 75 minutes for the same result.

Successful soap making secret

Trace is the term to describe the consistency or thickness, and the stage where the handmade soap mixture is ready to be poured into molds. Tracing is easily recognized. Using a plastic spatula, drizzle a small amount across the top of the soap mixture. If a mark or trail remains for a few seconds before disappearing again, your soap has traced. The mixture should have the consistency of liquid honey or pudding.

Your personal touch in your homemade soap

It is now the right time for you to add your own additives (essential oils, honey, milk, etc) before pouring the mixture into the soap molds, which you would have lubricated already with vaseline.

You may now cover the molds with a cloth and let them rest for 24 to 36 hours before getting hold of the soap. Indeed, saponification takes at least 24 hours to complete and, during this period, soap is still corrosive. You should be particularly careful to keep children away from it during this period of time.

After soap making

After this time, you can take the soaps off the molds, and rinse them to remove any excess of lye.

However, soaps are still rather soft, and you need to allocate around 6 weeks for them to be completely dry and hard.

Team Organic Soap Making Workshop - Funzing

Example of soap recipe

Various soap recipes can be found on websites about soap. For example, here is a very simple recipe:

– 450 grams of coconut oil;

– 700 grams of olive oil;

– 450 grams of vegetable fat;

– 600 millilitres of water;

– 223 grams of caustic soda.

I could not believe it when my wife told me the supposed “natural” soap I was very happy to use was staining my shower screen; and it was true! She gave me a natural handmade soap, and it was a discovery for me. The peppermint soap was so sweet on my skin and so refreshing! I had never felt such a thing. This started my passion for natural handmade, homemade soaps. I begun searching what were soaps made of, and was terrified when I learned what they put in commercially-produced soaps! Straight away I decided I had the mission to inform people about the risks with soaps bought at the supermarket, and to promote natural homemade soaps. It was not a big deal for me as I was already a definite user of natural medicine with essential oils. I hope you’ll enjoy reading and learning the techniques of bar or liquid soap making, and start making your own natural homemade soap!

What's your reaction?

Excited
0
Happy
0
In Love
0
Not Sure
0
Silly
0

You may also like

Leave a reply

Your email address will not be published. Required fields are marked *